Drayton DIGISTAT +2 22084 24 Hour PROGRAMMABLE Room Thermostat

Product Information

This range of valves and actuators are now obsolete. Your only option is to drain down the system and fit ZA 5/6 zone valve. If the valve is in the ‘Heating’ only position when the room thermostat becomes satisfied, then the valve will remain energised consuming some power and may be warm to touch. This is normal. Programmers

Depending on the fuel type you select during installation will affect how Digistat works with your boiler/heat source - so ensure to select the correct type during installation. Does Digistat work with combi-boilers and conventional boilers? There may be other Digistats powered up and within range and this will slow down the pairing process. If it is possible to depower the other Digistat please do this while you are pairing, or if not then press “I have done these steps” and wait for the RETRY button to appear. On the second attempt the pop-up should appear instantly. Manual thermosta:This option has no schedule and controls by temperature only. You set your preferred temperature and adjust it with the + and - buttons. In either mode the radiator or tap icon will be displayed. How do I change from Automatic to Manual mode? This thermostat also offers advanced energy-saving features, such as a frost protection mode and a vacation mode. These features help to ensure that your home is heated efficiently and cost-effectively.There are known issues using Bluetooth with some later Apple devices. However the RETRY button should allow you to pair your Digistat within a few attempts. The RF1, 2 and 3 are no longer available. They can be replaced with any current range of RF thermostats. Hard Wired Room Thermostats The actuator head of a ACL Lifestyle 2-port motorised valve (679H308-30L1) has failed. Is it still possible to get the actuator for this valve to avoid draining the whole system? Yes, there is a Digistat to suit both types of boiler – try our product selector to find the right one for you. How do you boost?

However this auto-pairing process only lasts 2 minutes (to avoid issues of pairing with the wrong Digistat). If you find that the 2-minute auto-pairing period has expired, please follow the following process: What should be done when E1 appears on the screen of a room thermostat. Does the whole wireless system need replacement?These batteries are factory fitted and not designed to be user replaceable. Unauthorised removal of the battery could damage the unit. TRVs

Preset 3 provides heating all day long How is Digistat suitable for visually-impaired tenants/homeowners? When used with an oil boiler the Digistat will allow the boiler to run without cycling for improved efficiency. The Digistat is universal because it can be used as a fully-programmable thermostat or as a simple manual thermostat. In fact it contains 4 types of functionality: When used with a Heat Pump the Digistat will protect the compressor by reducing cycling to 3 cycles per hour, to improve the life of the compressor.

Wiser Multi-zone Kit 1

To shut the valve off permanently use the plastic decorator cap that comes supplied with the valve, the valve will remain shut no matter what the temperature.

Yes, there is a Digistat to suit both types of boiler – try our product selector to find the right one for you. Do I need an OpenTherm boiler to use Digistat?

There are also known issues when pairing with Samsung smartphones using Android 11. Please change to an earlier or later version of Android. A room thermostat controls the heating in your home. If the room's temperature drops below your chosen temperature, the thermostat will switch on. Once the room has reached the chosen temperature, the thermostat will turn the heating off, preventing overheating and reducing energy consumption. This can help reduce your home's energy consumption. I have a Drayton TRV4 thermostatic valve on the radiator. Is it correct that it can be installed on both the Flow or Return and can be mounted either horizontal or vertical?